Bold Coast Metal Fabrication, Trescott, Maine

Precision laser-cut steel · Trescott, Maine

Steel timber brackets, cut to the drawing.

Truss sets, knee braces and custom plates, laser-cut from Standard 7ga and Heavy 1/4" steel on Maine's Bold Coast. Taking deposits now for sets that ship by November 2026.

Shop bracket sets Start a custom design

  • xTool 1200W fiber laser
  • Dimensioned drawing for every part
  • Confirm before we cut
  • Custom design work

Products

Shop by bracket type

Standard sets in four common roof pitches, plus cut-to-order shapes drawn to your timbers.

Rendering: truss bracket sets in raw steel on timber Order nowTruss bracket setsRendering: fan & gable plates in raw steel on timber Order nowFan & gable platesRendering: decorative knee braces in raw steel on timber Order nowDecorative knee bracesRendering: post-to-beam brackets in raw steel on timber Custom quotePost-to-beam bracketsRendering: straight & splice plates in raw steel on timber Custom quoteStraight & splice platesRendering: cross, hex & octagon in raw steel on timber Custom quoteCross, hex & octagonRendering: custom brackets & signs in raw steel on timber Order nowCustom brackets & signs

Standard sets

Ready to reserve

See all truss bracket sets →

Why laser-cut

Precision you can see in the steel

Plasma, arc and torch cutting leave rough edges, wandering holes and heat warp. Our parts are cut on an xTool 1200W fiber laser.

Tight tolerances

Fiber-laser cutting holds tight tolerances, so every plate matches its drawing.

Clean, square edges

A narrow kerf leaves crisp edges and sharp inside corners, with no torch bevel to grind off.

Accurate hole placement

Holes are cut from the same file as the outline, so they land where the drawing says, set after set.

Minimal heat and dross

A small heat-affected zone and little slag mean flat plates and less cleanup than plasma or torch cutting.

Parts that match the drawing

Every part starts as a dimensioned drawing. Repeat orders come off the same file.

How it works

From drawing to delivery

  1. 01

    Choose

    Pick your set, pitch, plate and hole size, or send us your sizes.

  2. 02

    Confirm

    We email your order details: size, pitch, hole size and quantity. Nothing is cut until you confirm.

  3. 03

    Cut

    Parts are laser-cut from the drawing, deburred and checked against it.

  4. 04

    Ship

    Packed and shipped from Trescott, Maine, insured for loss in transit.

Custom design

Drawn with you, approved by you

Odd pitch, full-dimension timbers, a shape nobody stocks, or your initials in the plate: send a sketch, photo or measurements. We draw it with you, send a dimensioned proof, and revise until you approve it. Nothing is cut until you sign off.

Start a custom design

Finish

Raw steel, ready for your finish

Soft-launch sets ship raw: laser-cut, deburred, unfinished steel. Mill scale and surface rust are normal. Clear, oil or paint it to suit your build. About the raw finish · Finishing guide.

Product images are renderings and drawings from our own CAD until the first production sets are photographed.