House Number Sign
Custom laser-cut 14 gauge steel house-number sign for a driveway or entry.
Raw steel
Ships raw (unfinished steel). Will rust outdoors if unprotected. Powder coat coming later.
Specifications
| SKU | BC-HNS |
|---|---|
| In the box | 1 sign, cut to your number and optional name, with mounting holes |
| Sizes | 12×24, 18×36, 24×48. Other sizes by custom quote, up to our 24×48 pass-through. |
| Plate | 14 gauge A36: about 0.075" (the thickness of a nickel). |
| Hole size | Your choice: 3/8" (about 5/16" lag screws), 7/16" (about 3/8" lag screws or bolts), 9/16" (about 1/2" lag screws or bolts). Mounting holes are cut with the sign. |
| Hardware | Hardware not included. Customer supplies lag screws or bolts. |
| Finish | Raw, deburred. Powder coat coming later. |
| Packed weight | ~8–10 lb (12×24) / ~16–19 lb (18×36) / ~28–32 lb (24×48) (estimates) |
| Ships | Made to order. Typical handling is 3–5 business days after you approve the proof. From ZIP 04652. |
Wording and size
Pick 12×24, 18×36 or 24×48, or ask for another size up to our 24×48 pass-through. Send the exact name, number and any date you want on the plate. Images show an example layout; your sign is proofed before we cut.
Images are renderings from our own CAD until we photograph a production sign. Raw steel color and mill scale will vary.
Why laser-cut
Cut to the approved proof
Each sign is cut on our xTool 1200W fiber laser from the dimensioned proof you approve.
Tight tolerances
Fiber-laser cutting holds tight tolerances, so every plate matches its drawing.
Clean, square edges
A narrow kerf leaves crisp edges and sharp inside corners, with no torch bevel to grind off.
Accurate hole placement
Holes are cut from the same file as the outline, so they land where the drawing says, set after set.
Minimal heat and dross
A small heat-affected zone and little slag mean flat plates and less cleanup than plasma or torch cutting.
Parts that match the drawing
Every part starts as a dimensioned drawing. Repeat orders come off the same file.
How it works
From drawing to delivery
- 01
Choose
Pick a size and send the wording, number and any date you want on the sign.
- 02
Proof
We send a dimensioned proof of your layout. Revisions are free until you approve.
- 03
Cut
The sign is laser-cut from 14 gauge steel, deburred and checked against the proof.
- 04
Ship
Packed and shipped from Trescott, Maine, insured for loss in transit.
Questions
What wording can I put on it?
A farm, ranch or family name, a house number, an established date, or a short line of your own. Send the exact text on the quote form. We send a proof before we cut.
Are these official address signs?
They are decorative, cut-to-order signs. If your town requires a specific size or reflective marker, check that first or mention it on the quote.
Is hardware included?
No. Hardware not included. Customer supplies lag screws or bolts. Mounting holes are cut with the sign. Pick the hole size that suits your fasteners: 3/8" for about 5/16" lag screws, 7/16" for about 3/8" lag screws or bolts, 9/16" for about 1/2" lag screws or bolts.
What finish?
Raw unfinished steel, laser-cut and deburred. Mill scale and surface rust are normal; clear, oil or paint it to suit. Powder coat is coming later.
How is it cut?
On an xTool 1200W fiber laser, from a dimensioned drawing. That gives tight tolerances, clean square edges and accurate, repeatable hole placement, with far less heat distortion and dross than plasma or torch cutting.
When does it ship?
Made to order. Typical handling is 3–5 business days after you approve the proof.